Slurry Weight

Definition - What does Slurry Weight mean?

Slurry Weight is the product of slurry density and slurry volume. Slurry density is the prime parameter that needs to be calculated in order to find slurry weight. Slurry Density is the ratio of sum of the weight of water and additives to the volume of cement slurry. It is usually expressed in kilogram per cubic meter (kg/m3) or pounds per gallon (lb/gal). In a typical oil or gas well, cement slurry density can range from 1380 to 2280 kg/m3 or 11.5 to 19.0 lb/gal. With the help of special techniques such as foamed cementing and cementing through particle size distribution, the Slurry Density of the mixture can be improved up to 2780 kg/m3 or 23 lb/gal.

Slurry Weight = Slurry Density x Slurry Volume

Petropedia explains Slurry Weight

Below are the steps taken to calculate slurry density, other parameters are usually known or can be calculated:

In order to calculate the Slurry Density, the following parameters need to be found out in the following order:

1. Additive weight per cement sack (in pounds, lb)

Weight = percent of additive x 94 lb/sk

2. Total amount of water requirement (in gallon per sack, gal/sk)

Water = water requirement by cement (gal/sk) + water requirement by additives (gal/sk)

3. Slurry volume (in gallon per sack, gal/sk)

Volume = (94 lb / Specific Gravity of cement x 8.33 lb/gal) + (weight of additive, Ib / Specific Gravity of additive x 8.33 lb/gal) + water volume, gal.

4. Slurry Yield (in ft3/sk)

Slurry yield = Slurry volume, gal/sk / 7.48 gal/ft3

5. Slurry Density (in pounds per gallon, lb/gal)

Slurry density = 94 + weight of additive + (8.33 x volume of water per sack) / slurry vol, gal/sk.

Connect with us

Petropedia on Linkedin
Petropedia on Linkedin
"Petropedia" on Twitter

Sign up for Petropedia's Free Newsletter!

Email Newsletter

Join thousands of others with our weekly newsletter