Definition - What does Elasticity Modulus mean?
Elasticity Modulus, also known as modulus of elasticity or young's modulus is the measure of rigidity or stiffness of a material. In terms of the stress-strain curve, the modulus of elasticity is the slope of the stress-strain curve in the range of linear proportionality of stress to strain. The greater the modulus, the stiffer the material, or the smaller the elastic strain that results from the application of a given stress. The modulus is an important design parameter used for computing elastic deflections.
Petropedia explains Elasticity Modulus
One of the most important properties solids is elasticity modulus. It is the ratio of stress to strain when deformation is totally elastic. Stress is defined as force per unit area and strain as elongation or contraction per unit length. This modulus may be thought of as a material’s resistance to elastic deformation. A stiffer material has a higher elastic modulus. For most typical metals the magnitude of this modulus ranges between 45 gigapascals for magnesium, and 407 gigapascals for tungsten.
There are three types of moduli:
- Elastic Modulus (Young's Modulus) - this is the ratio of longitudinal stress to strain.
- Shear Modulus - this is the ratio of tangential force per unit area to the angular deformation of the body.
- Bulk Modulus - this is the ratio of stress to the fractional decrease in the volume of the body.
The stress-strain curve is used to measure elastic modulus and shear modulus. The parameters used to describe the stress-strain curve of a material are tensile strength (ultimate strength), yield strength (or yield point), percent elongation and reduction of area. A material that has a higher elastic modulus is said to be stiffer than one with a lower elastic modulus. Modulus of elasticity has the same dimension as stress because it results from dividing the stress by strain.
The values of the elastic modulus for ceramic materials are about the same as for metals; however, for polymers they are lower. These differences are a direct consequence of the different types of atomic bonding in the three material types. Furthermore, with increasing temperature, the modulus of elasticity diminishes.